Basic Fall In-Room Monitor With 5 x 30 Bed Pad

Ships Today
(You save $3.00 )
Current Stock:
Adding to cart… The item has been added

       Affordable Bed Pad  5 x 30 In-Room Alarm with Monitor  (BB90-SYS) 

Supports one corded product per alarm (TL-2100B)

In response to market demand for a low cost – no frills fall prevention monitor (bed exit alarm), Smart Caregiver Corporation is introducing the TL-2100B Basic Bed Exit Alarm Fall Prevention Monitor.

This Bed Exit Alarm Fall Prevention Monitor is recommended for nursing homes, any home or facilities with a tight budget. It is made of durable plastic and includes simple features including nurse call port to connect to existing nurse call systems. It will automatically reset when a resident places pressure back on a bed or chair pad.  Easy to reset with a large raised button on the face of the unit.

It includes a status light to let you know if the pad is disconnected and a low battery light. The Basic Fall Monitor comes with built – in strain relief clip to reduce the number of broken cords from accidental or excessive pulling from resident or bed rails.

 Auto-Reset Function:  The Basic Fall Prevention monitor automatically resets when pressure is placed back on a connected pressure pad. Monitor can also be reset by pressing the reset button on the front of the monitor.

Bed Exit Alarm monitor can be set to silent:  Monitor can be set to silent if used with an existing hard-wired nurse call system.  This makes it less disturbing to residents while maintaining safety by alerting the caregiver at the nurse’s station.


Bed Exit Alarm – Basic Fall Prevention Monitor

  • On/Off Switch
  • Equipped with auto-reset button – Auto reset when pressure is re-applied to the sensor pad
  • Adjustable volume control
  • Variable Tone Settings
  • Monitor can be set to silent if corded nurse call button is used
  • Status Light when in use, the visual alert light blinks every 4 seconds
  • Low battery light – will flash to alert caregiver that the battery is getting low in the monitor
  • Nurse call port – connects monitor directly to existing nurse call system
  • Battery operated (1-9v not included) or recommended optional AC adapter (AC-02)
  • Wall Mount Screws and Hardware
  • Distance/Range 150 Feet
  • 90 Day Bed Pad
  • 1 year warranty-monitor


How it works?

Place the bed sensor pad under your patient’s back or buttock area (beneath the fitted sheet). The bed sensor pad has a cord which runs along the side of the mattress. When the patient starts to sit up, taking their weight off the bed sensor pad, the pad sends a signal to the bed alarm monitor and the monitor will start to alarm and let you know the resident needs assistance. By having a bed alarm in the room with the patient, you will not only hear the alert from an adjacent room, but the patient may slow down and wait for you because they hear the alarm sound, giving you valuable time to come to their aid.



American-Made Smart Caregiver pads are made of soft FDA approved vinyl. Pads are water resistant and the cord is reinforced at the pad for heavy-duty strain relief. Bed Pad 90 day against Manufacturer Defect TL-2100B Monitor - 1 year against Manufacturer Defect